AquaPlus

Aqua Plus Pipes With Fiberglass

The new pipes Aqua- Plus- GF are designed, manufactured and tested for quality in compliance with the standards that apply for the simple polypropylene pipes (EN 15874 & DIN 8077/78) and in accordance with the special instruction HR 3.28 of the German Institute SKZ.
The polypropylene that is used for the three- layer Aqua- Plus- GF pipes (with fiber mechanical aid in the middle layer), is characterized as polypropylene random of special crystallinity (PP-R 112) and due to its high mechanical strengths (especially at high temperatures) and due to its long life time, is classed according to DIN 8077/78 in the category MRS 11.2 MPa (PP-R 112), in contrast to the simple PP-R which is classed in the category MRS 8.0 MPa (PP-R 80). 

 

Basic Advantages of Aqua-plus fiberglass

  • Aqua Plus with fiber glass is to reduce the thermal linear expansion at 75% (0,030mm / m / ° C) compared with ordinary polypropylene tubes.
  • Pressure resistance is 25% higher than ordinary PP-R pipes
  • High rigidity 
  • Greater quantities of transferable water 
  • High lifespan particularly at elevated temperatures
  • The thermal welding of the new pipes with fitting made with the same easiness like the classical pipes.
  • Produced in Sdr 7,4 and Sdr 11

 

External diameter (mm)

 

 

Wall Thickness
(mm)

 

 

Inner diameter (mm)

 

202.814.4
253.518.0
324.423.2
405.529.0
506.936.2
638.645.8
7510.354.4
9012.365.4
11015.179.8
125 17.190.8
160 21.9116.2
20027.4145.2

External diameter (mm)

 

 

Wall Thickness
(mm)

 

 

Inner diameter (mm)

 

322.926.2
403.732.6
504.640.8
635.851.4
756.861.4
908.273.6
1101090
125 11.4102.2
160 14.6130.8
20018.2163.6
 
25022.7204.6
31528.6257.8

Temperature
(oC)

Lifetime
(Years)

Pressure (bar)

Safety Factor

20o5029.21.5
40o5021.51.5
60o5015.41.5
70o5012.91.5
80o509.11.5

*For the pipes lifetime we calculate the continuous flow rate of the water 24h pre day.