The collectors are manufactured from a brass profile that meets the requirements of the European standard EN 12167 and DIN 50930/6 which refers to the suitability of brass fittings for potable water installations. The product has a low hardness to be more resistant to mechanical stress. . The angle of inclination of the mechanisms in relation to the vertical axis of the collector is 180°, resulting in increased supplies and improved flows.
The collector is used in heating installations and in hot-cold water plumbing installations.
They are produced in 3/4'', 1" and 1¼" sizes from 2 to 12 supplies with 24x19 or 3/4" threads.
Advantages
- Great benefits.
- Battery-type mechanism. During the rotation of the steering wheel, the shaft does not rise and fall, only the valve, and at the same time, scale build-up on the o-rings is avoided. This prevents wear of the shaft orings.
- Shaft sealing is achieved with 3 o-rings and a packing.
- Sealing at the collector seats is achieved with Epdm quality o-rings and at the same time seals metal to metal.
- Large distances between the centers of the collector supplies (50 mm) blue and red color as well as the indications for the designation of the circuits (living room, bedroom, etc.).
- Possibility of replacing all the individual parts of the collector. Due to special threads in the mechanism, a few rotations (4 rotations) are needed to open/close the supply .
