Interplast manufactures PVC drainage pipes for use in building sewage installations, industrial wastewater discharge installations, sewage installations, ventilation networks and underground cable routing networks.
The pipes are manufactured in cross sections ranging from 32 mm to 200 mm, in straight 3m lengths, in the following types:
Pipes in grey and white, under the trade name Unisol, in compliance to standard EN 1329. This type of pipe is suitable for wastewater discharge inside and outside building installations at high and low temperatures.
Grey and white pipes, under the trade name Novaplus, This type of pipe is usually referred to in the marketplace as pipe 6 Atm.
It is recommended that heating-plumbing technicians only use pipes that are covered by standard EN 1329, since they are the only PVC pipes that according to technical guideline (2412/86) of the TEE (Technical Chamber of Greece) and ministerial decision (Government gazette 743/1992) can be used in building sewage installations.
Certifications: EVETAM Greece.
Guarantee: 10 years for sewage pipes manufactured according to standard EN 1329, covered by the ALLIANZ insurance company to a sum of up to € 3,000,000.
| CROSS-SECTION | WALL THICKNESS | PACKAGING |
|---|---|---|
| 32 | 3.0 | 60 |
| 40 | 3.0 | 30 |
| 50 | 3.0 | 30 |
| 63 | 3.0 | 15 |
| 75 | 3.0 | 15 |
| 100 | 3.0 | 15 |
| 125 | 3.2 | 9 |
| 140 | 3.2 | 9 |
| 160 | 3.2 | 3 |
| 200 | 3.9 | 3 |
* Pipes are also available in 3m straight sections in gray and white.
| CROSS-SECTION | WALL THICKNESS | PACKAGING |
|---|---|---|
| 32 | 1.8 | 60 |
| 40 | 1.8 | 30 |
| 50 | 1.8 | 30 |
| 63 | 2.0 | 15 |
| 75 | 2.0 | 15 |
| 100 | 2.3 | 15 |
| 125 | 2.5 | 9 |
| 140 | 2.8 | 9 |
| 160 | 3.0 | 3 |
| 200 | 3.7 | 3 |
* Pipes are also available in 3m straight sections in gray and white.
Products
Unisol Pipe (Grey)
