Skip to main content

Search

Search the whole content of the site. The search results will contain; Product pages, Downloads, Links etc.

Products

Search for the products of the Interplast

Downloads

Search Technical Guides and assets

Pages

Search pages and site content.
interplast

Autonomy Areas

  • The thermostat, which reacts to temperature changes with an accuracy of 0,1 ° C and thereby achieve the desired room temperature
  • Thermal motors (actuators) that communicate via the hub with the corresponding thermostat and open or close circuits of under-floor heating.
  • We can connect up to four thermal motors (actuators) with a thermostat space. In this way we achieve autonomy in all areas of a house, so economical operation and the possibility of different temperature selection per heated room.
  • The communication basis - distributor who takes command of thermostats space and relays to the thermal motors (actuators) to manifolds to open and close the circuits according to the desired temperature in each space.
  • Actuator pump which starts or stops the heating circulator with the required time delay when the thermostats give start command or termination of heating to electrothermal engines.
  • A smart and flexible solution where we want to place retrospectively separate thermostats to control the desired temperature per space, without having to install communication cables is the system of wireless thermostats. The space thermostats operate as transmitters and the base as receiver, giving commands to the thermal engines collector to open and close the circuits without using cables.
  • To automate the operation control of under-floor heating is available compensation systems. The compensation recognizes the ambient temperature with a sensor and acts on the three-way mixing valve and pump heating. This prevents the inertia of the system according to the environmental temperature changes, achieving economical operation of heating.

Products

downloads-img

To find technical manuals, promotional materials, certifications and warranties, visit the Downloads page

Locations

Brass products Factory
Kefalovrisou 23, 13 677 st. Monopati, Acharnai, Athens, Greece
Plastic factory
Industrial area of Komotini, 69100 Komotini, Greece
Offices / Exhibition
El. Venizlou 9B, 57 001 Thermi Thessaloniki, Greece